cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Optura 20 camcorder

uscfof
Apprentice

I have an Optura 20 camcorder that I use as a finish line camera for bicycle races. It is connected to a macbook via firewire into the iMovie program. Some setting on the camcorder  must have got changed to cause these weird images to appear. By weird I mean things like other scenes or balloons floating around. Could someone tell me what may be changed to eliminate this?

1 ACCEPTED SOLUTION

Richard
Product Expert
Product Expert

Hi Uscfof,


From your description, it sounds like you may have enabled the "Demo" mode.

 

The setting for this is in the MENU under "Display Set Up".  Go to "Demo Mode", change this setting to "Off", then exit the menu. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

1 REPLY 1

Richard
Product Expert
Product Expert

Hi Uscfof,


From your description, it sounds like you may have enabled the "Demo" mode.

 

The setting for this is in the MENU under "Display Set Up".  Go to "Demo Mode", change this setting to "Off", then exit the menu. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.