08-06-2014 04:53 PM
I purchased a new Canon bp808 battery and it also will not charge. If the problem is in the camcorder can I just buy a charger to charge the batteries. The LED flashes red slowly 3 times and then rapidly.
08-10-2014 08:59 AM
Hi elsa3732!
Thanks for the post.
The rapid red flashing means the battery pack is not able to be charged. Make sure the camcorder is off and external power is connected before you install the battery pack to charge it. If the camcorder feels very warm, either from use or from higher external temperatures, let it sit powered off to cool down for a while before you try charging the battery.
If none of this helps, then the camcorder will need to be serviced. To start this process, you'll need to complete a Repair Request on our website.
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.