Always good to know what you want and what you can tolerate. And if you do end up wanting to go Strobist for cheap in the future, you can always pick up a Godox speedlight, then.
Hopefully you've found a solution by now, but just in case, here's my advice:Ditch the Cactus V6. All you can do to use one with an AD200 is cable it as a receiver, and that renders your AD200 into a manual-only light that you can only fire.Get a God...
This is just me, but the TT350-C should work just fine on an R8 without an AD-E1 adapter. The only body that requires the AD-E1 to work with any flash that has the traditional Canon five-pin layout on the bottom of its foot is the R50, where all five...
First off on the 600D, make sure flash is enabled and not turned off. Then, make sure the X2T-C is pushed full forward into the camera hotshoe so that all five pins on the foot are touching the five contacts on the camera hotshoe. Make sure the TT600...
@kvbarkley wrote:Except there is more hardware/software involved than just the contact.It's possible. But it's also possible that the entire assembly took care of the hardware, and that the DryOS and DIGIC processor in the SL3 might be more or less i...
