Canon Community

Skeleton567 · 05-18-2023

I changed from Comcast to Metronet internet service. MY MX922 printer/scanner was working well before the change. Now I can't get Win 10 to find the device. I've tried both wireless and ethernet router. After an hour with a Canon tech we did fina...

Skeleton567 · 02-20-2023

MX922 'not responding' Windows 10 after router changeinternet provider forced me to change router. MX922 wireless is now 'not responding'. Have downloaded and reinstalled drivers. got no desktop icon for support application. MX922 says it has fou...

Skeleton567 · 01-07-2014

Support Code 2804 MDF failure to scan. 'doc size not suitable for duplex scanning'. Win 7, Pixma MX922 Tech support tried valiantly to figure this out but could not, so I'll share my solution. I suddenly kept getting Support Code 2804 failure on M...

Skeleton567 · 02-28-2023

Figured it out. Had to enter the PASSWORD , not the USER, on the printer.

Skeleton567 · 05-03-2018

Unless you are scanning to a local disk, such as a USB drive, you have to tell the MX922 where to send the scan results, and that must be a computer that can be found on the network. I believe that usually any machines that have the MX922 defined as...

Skeleton567 · 06-12-2015

on the printer panel, part of the scan setup is to select the PC to which the file is to be sent. This may be your problem. I'm over 1000 miles from my printer, so chan't check any further now. Not sure if all available systems show up or if you ne...

Skeleton567 · 06-12-2015

Like I said, I've done hundeds of multipage duplex documents this way. You MUST use the document feeder, not the glass surface. Place the docs face up in the feeder and initiate the scan FROM THE PRINTER. Check my process again and if there is any...

Skeleton567 · 11-12-2014

The easiest way to scan multiple pages into a single file is to initiate the scan from the printer itself while your PC is on the network. In the printer setup screens, select pdf file, and on the Save/Forward menu tell it to send the file to the co...

Canon Community

User Statistics

User Activity

Windows 10 doesn;t find MX922 after changing internet

PIXMA MX922 'not responding' after router change

Support Code 2804 on Canon MX922

Re: PIXMA MX922 'not responding' after router change

Re: MX922 scanner problem message: set the pc to start scanning

Re: MX922 scanner problem message: set the pc to start scanning

Re: MX922 scan multipage pdf

MX922 scan multipage duplex pdf