It’s usually a network problem, even if the signal appears fine. Try assigning a static IP address to the printer from your router's settings, then reinstall it on your Mac and phone using that IP address. That often clears the “offline” problem.
Still a relevant question even in 2025! GIMP is solid for a free option, but I’ve been using Darktable lately, great for RAW editing and feels a bit more polished. Also worth checking out is Photopea if you want something browser-based and quick.
Hey LucyLou! On the SX70 HS, make sure the AF mode is set to Face + Tracking or 1-point AF in the menu. Also, half-press the shutter button, not just the AF button; it should lock focus, and you’ll see a green box in the viewfinder if it works.
The easiest way is to use a USB cable (should be Mini USB) and connect it directly to your computer. It should pop up like a flash drive. Or just pop out the SD card and use a card reader.
Laser printers like the MF753Cdw get really hot and can cause shrink film to melt or warp inside the machine, so it’s not recommended. Inkjet printers are much safer for that kind of material. If you’re set on using shrink film, maybe consider a chea...
