Depending on the operating system you're using, you may need to create a custom page size with no border (margin). There may also be a check box for borderless printing.
Hi, I would try turning it on with the paper feed open and see if it starts up with a different error code to close the feed door or drawer. Maybe this will get you into the firmware update.I would also double check there isn't a pesky tiny piece of ...
I had this happen to one of my Pro-2100 printers using 3rd party inks and they gummed up the lines. I had everything gutted and replaced from the sub-tanks to the print head and it still didn't work after that.If yours using 3rd party inks that could...
This happens with a very light blue for me and it's seldom an issue. I'm printing on a Pro-2000 and 6100 but they all use the same print head. My solution has been to place the image 2" down to avoid the issue. My conclusion is there is an issue with...
