If you are fitting a used 2nd hand head to replace the erroring head, there is no setup required.Make sure the machine is off and unplugged from the wall and then unplug vacuum line and data cable.No need to worry about dried up ink on other head as ...
There is marking in the carriage PBA where the ID’s plug in that show the ID designation. Open the lid and move the carriage to the access point and look straight down.From left hand side which is 8 to right side which is 1 viewed from front of the m...
All errors of the 450011, 450012 and 450013 are all Image Device (ID) problems. There will be a number after the error which show you the ID number. ie ID7. As there are 2 of each colour ID in the machine which is a total of eight, you can swap ID’s ...
