cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Brasstown Bald, Georgia

Tintype_18
Whiz

This is the highest mountain in Georgia at 4,784 ft. Due to the altitude and snowfall, it is closed from about November 1st to early spring. One can see four states on a clear day. One of our favorite places to visit. It's a long and steep walk to the top but for a couple of bucks, one can ride a mini bus to the top. There is an interesting visitor's center and small museum. It's located in NE GA near the towns of Blairsville and Hiawassee. It was a cloudy, hazy day. Should have used CP filter? Specs: Canon T7, f/20, 1/50, ISO-100, +0.3 step. Critique is welcome.IMG_8911 (2).JPG

John
2 REPLIES 2

Tronhard
Elite

 A CP filter might have helped.  Also, you could try judicious use of the haze filter in Photoshop to see what that yields.  Looks like you are above clouds or mist from your vantage point.


cheers, TREVOR

Before you ask us, have you looked in the manual or on the Canon Support Site?
"All the beauty of life is made up of light and shadow", Leo Tolstoy;
"Skill in photography is acquired by practice and not by purchase" Percy W. Harris
"

Tintype_18
Whiz

Trevor, thanks. I'll fire up the PSE tomorrow as I have some other photos to edit for practice. Yes, the altitude was such that we were above most clouds. I have always been told I have my head in the clouds. Can't understand why?

John
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!