09-18-2013 08:07 PM
Ive aligned my print head twice, and I still dont know why its doing this, but whenever I print ( just printed a 13x19, was printing some 8.5x11 earlier) I get a tiny white strip on the left side of the picture and along the bottom. The one along the bottom gets slightly bigger as it goes to the right.
Its almost like the paper is maybe not going in perfect straight, but it seems to be the exact same strip of white in the exact same places every time.
Any idea what I can do to fix this?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.