11-26-2013 12:01 PM
Has anyone been successful in printing to a Pixma PRO-100 from DxO Optics Pro V 8 or 9? DxO has a print 'module' in V8 & 9 to facilitate printing but I still cannot print a 4x6" image on the PRO-100. The DxO Print screen has a very limited set of page sizes that does not include 4x6" but does have a 'Compact (4.25 x 6.75")' size. The printed image is shrunk proportionally to produce a reduced printed image on the 4 x 6" paper. DxO suggested setting the paper size in the printer driver, which I tried, but the Print screen paper size overrides the printer driver and produces the smaller image. The PRO-100 works properly with every other application I have!
Any help would be appreciated.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.