12-21-2022 11:46 PM - last edited on 12-22-2022 09:12 AM by Danny
In one of the offices I support there is a Canon iR-ADV 4545/4551 multi-function device. It is the only printer in the office. We have a use case where a special invoice print job must be run on a monthly basis on special form for invoicing that we don't want other users to waste by printing "normal" jobs to. I figured I could create two print queues - one for normal printing, one for invoice printing. The concept I have is that the "normal printing" queue would enable all trays EXCEPT the tray with invoice paper, and the "invoice printing" queue would be the reverse of that, enabling only the tray with invoice paper.
The current driver for the printer queue is "Canon iR-ADV 4545/4551 UFR II" and I can't see any way with this one to change that configuration. Anyone know if the concept I have is actually possible with this driver, or another driver? Noting that I've tried the "Canon Generic UFR II V4" driver, which seemed to have that capability, but jobs would send from the Windows device successfully, but the printer would report "Could not be executed because the file contains unsupported data".
Any help anyone could provide would be greatly appreciated.
12-21-2022 11:55 PM
Thanks for posting!
While our Forum Community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you!
If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.