04-19-2023 10:34 PM
I am trying to print with sheets with the 4100S. I am getting an error pertaining to paper mismatch that the machine is set for roll paper. There is a roll loaded in the machine. I can load a sheet into the paper feed but I continue to get the paper mismatch error. I assumed when a sheet was loaded into the machine it would be detected as a sheet to be printed on but apparently not. Does the paper roll need unloading before using sheets? How do I set it to print on sheets?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.