09-08-2022 03:59 PM
printer: imagePROGRAF Ta-30
OS: Mac os12
I recently had to replace the printhead in my printer. After installing the new printhead (PF-06) I was able to continue printing however the intervals between scans is now about 25 seconds. Im printing on adhesive vinyl to create large 6 ft banners and a print that should take about 5 minutes is taking 2 hours. I've tried reseting both my computer and printer and made sure all the firmware is up to date. Im not sure what else to do.
09-14-2022 01:12 PM
Hi Tristan92,
It is recommended that you contact technical support via phone for further assistance. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 8:00 pm Eastern Time, excluding holidays. A Technical Support Representative can determine the cause of the issue and resolve it for you quickly via phone or provide you with your available service options.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.