cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon imagePROGRAF Ta-30 Printing very slow

Tristan92
Apprentice

printer: imagePROGRAF Ta-30

OS: Mac os12

I recently had to replace the printhead in my printer. After installing the new printhead (PF-06) I was able to continue printing however the intervals between scans is now about 25 seconds. Im printing on adhesive vinyl to create large 6 ft banners and a print that should take about 5 minutes is taking 2 hours. I've tried reseting both my computer and printer and made sure all the firmware is up to date. Im not sure what else to do.

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi Tristan92,

It is recommended that you contact technical support via phone for further assistance. There is NO charge for this call. Please dial 1-800-423-2366, Monday-Friday 8:00 am to 8:00 pm Eastern Time, excluding holidays. A Technical Support Representative can determine the cause of the issue and resolve it for you quickly via phone or provide you with your available service options.

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Avatar
Announcements