09-29-2017 06:58 PM - edited 09-29-2017 07:05 PM
Hi,
I have two Canon printers: (I'm using Win10/64 pro)
1) MG7100 Inkjet with scanner (connected via network cable)
2) LBP6030 Laser connected via wireless.
All work well, however when I installed them I ended up with two of each printer.
One of each on a WSD port
In addition the laser is also on a "MFNP port"
and the Inkjet is on a "Canon BJ newtork port"
Can someone tell me which to keep and why? I've searched both on the internet and cannot find any information suggestion which is better.
Thanks
John
12-12-2017 10:03 AM
Hi JohnR,
The WSD port is created when Windows detects your printer.
The port that should be used is the Canon BJ newtork port, as this is installed by your printers installer.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.