10-05-2023 11:18 AM
Hello,
I just purchased the Canon Prograf 1000 printer. I’d like to be able to run the Nozzle Check utility remotely using the Canon Print utility. If I try to do so, I get an “Unable to Connect to Printer” message. Does anyone know if this can be accessed remotely, and if so, how to do so?
Thanks
10-09-2023 01:19 PM
Hi,
If the print utility and printer are installed on the same computer and network then it should connect. If you are trying to access the printer remotely, you would need to access the printers remote user interface. Please click HERE for more information.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
10-09-2023 03:20 PM
Just tried as described. It did not work
10-17-2023 12:56 PM
Hi,
At this time, I recommend you reach out to Canon support. You will need to register your Canon gear HERE to access additional support options.
We look forward to hearing from you.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.