07-12-2024 11:27 PM - last edited on 07-16-2024 11:49 AM by Danny
i HAVE JUST CONNECTED TO sTARLINK AND MY pIXMA 5760 canon printer is behaving erratically
1. Takes at least 3 minutes to respond
2. Various messages: Printer is offline, printer not responding, port in use please wait,
3. prints a copy eventually but printer does not recognise it has printed it and reprints it
4. you have to delete print queue to stop printing as the print queue dies not react when item is printed
5. I have contacted Canon who basically had me check settings which were ok, restart my computer. This fixed the problem but it has returned and the aforementioned solution is not working.
07-13-2024 12:51 AM - edited 07-13-2024 12:52 AM
Greetings
I would suggest you separate the bands and broadcast on your starlink router. Give the 2.4 GHz broadcast a unique name. Connect the printer to this broadcast.
Assign the printer of static IP address on the router.
Remove the printer from your computer and restart your system.
Now re-add the printer using the IP address you reserved for it previously.
Retest printing.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.