I am about to throw my printer (Canon Pixma MG3620) out the window. We moved recently and got a new internet provider. I can't for the life of me get the printer connected to the new wifi.
I have downloaded the PRINT app on my iPhone. I get as far as step #14. My phone says "Wait for your printer name to appear, and then select your printer." But nothing happens! Someone please help!! Thank you in advance
I’m posting this reply bc I had the same issue and was able to resolve it. After trying for many hours to add the printer using the cable-less setup method and getting stuck on the register printer screen in the app, I tried the WPS setup and it worked. Basically you push the WiFi button on the printer and let go after you get one orange flash (presumably that lets the printer know you’re trying to do WPS setup). You have then push and hold the WPS button on your router. I held the button for about a minute or so and my printer showed up on the register printer screen. I was able to print from my iPhone. And since the printer was now connected to WiFi I was able to add it on my laptop that uses Windows 10. Hope this helps anyone out there searching for a solution.
No. Not a problem. Many ISP issued devices don't have a WPS button.
Lets look more closely at the network. The printer is only capable of connecting to a 2.4Ghz wireless broadcast. Is your T-Mo gateway dual band? Meaning does it support 2.4/5G wireless and is it using the same SSID name for both networks? If so, try temporarily disabling the 5G network and then try connecting the printer again.
See this link for more information:
Bay Area - CA
~R5 C (18.104.22.168) ~RF Trinity, ~RF 100~400, +Canon Control Ring~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It