12-04-2024 04:18 PM
Got a new router. During LAN Setup the printer allows me to select the new SSID but then automatically tries to connect and fails. No screen ever appears asking for a new passkey. I've reset to Factory settings. Unplugged. etc etc. Any ideas on how to get it to allow me to enter a new password? Thanks.
12-04-2024 04:26 PM
Hey there!
I'm not a tech, but I found a Network Troubleshooting guide on the MX870's web page.
FYI, this unit was retired in 2016, so there is no official support from Canon USA, so I hope this information is helpful!
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.