11-24-2019 10:39 AM
(1) Anyone know the specs for the ACK-DC80 coaxial power connector? Something like 3.5/1.3?
(2) Voltage is 7.4VDC?
(3) Center positive?
Ken C
11-24-2019 12:17 PM
7.4V@2A
Center positive
As far as the plug size I measured mine at 3mm by about 1.2mm. The inside diameter was hard to measure with my caliper because it is so small but it is close to 1.3mm +/- 0.1mm. I inserted a 1.3mm watch band pin inside it and it felt like a good fit.
11-24-2019 03:13 PM
Thank you!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.