cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Powershot G16 did not propper start

Boerni
Contributor

I am searching for a reset during Power on. Batterie remove and/or pressing some keys did not work.

1 ACCEPTED SOLUTION

yesterday I got my G16 back.

The following parts were exchanged
   1x PLATE, BODY NUMBER, 13CH
   2x SCREW
   1x COVER ASS'Y, TOP

I gave 111 Euros to the UPS employee.

View solution in original post

8 REPLIES 8

John_
Authority

Did you try removing the battery and holding the on switch on for about 30 seconds then replace the battery? 

yes with and without memory card. pressing "FUNC. SET" during power up will show the time.

If you now move the camera, the date will be displayed additionally.
Turning the control wheel changes the background color from the display. 
 

Because the quick response from the Canon support was send in for repair.
further search revealed the following:
http://www.dpreview.com/forums/thread/3863024
It describes my problem for a G15.

another request at the Canon support gave the same answer. I have now sent the G16 for repair.

Best wishes for a speedy inexpensive repair!

yesterday I got my G16 back.

The following parts were exchanged
   1x PLATE, BODY NUMBER, 13CH
   2x SCREW
   1x COVER ASS'Y, TOP

I gave 111 Euros to the UPS employee.

That's $135 US dollars and I think you did well with that!!

I don't think so.Christmas and New Year documents with a smartphone. All low-light images are noisy.

My next camera will not be a Canon anymore. Probably an Olympus.

Announcements