cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Grid line display

woodmaster100
Apprentice

I have  a2300 Powershot black and just can not get to the display menu that turns on to the the Grid lines. The only display I get starts with" Lamp Display" on top. This is a really basic question but it has me stumped. Could somebody help me with a very simple explanation...........thanks................

 

1 ACCEPTED SOLUTION

smack53
Mentor

Hi Woodmaster100,

 

According to the manual, the grid lines are not available in Auto mode. If you go into the P mode, you should be able to access the grid lines option from the menu. This will be near the end of the list. 

 

Hopefully this answers your qauestion.

 

Smack53

View solution in original post

3 REPLIES 3

GaryS
Enthusiast

Does Menu>Change shooting settings>Custom display not work?

smack53
Mentor

Hi Woodmaster100,

 

According to the manual, the grid lines are not available in Auto mode. If you go into the P mode, you should be able to access the grid lines option from the menu. This will be near the end of the list. 

 

Hopefully this answers your qauestion.

 

Smack53

woodmaster100
Apprentice

thanks for the two replies, I have hit the up arrow button over hundred times and all it does is switch from auto mode to miniature mode. I have not seen the LIvE display yet

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.