09-18-2019 01:12 PM
MB2320 is going through the motions... sometimes it will print but is very very faint...
New ink cartridges installed (multiple times)
No error messages...
Same problem whether it's from a Windows device or Mac...
09-20-2019 01:42 PM
Hi MyBrokenJeep,
Please perform 2 deep cleanings:
1. Swipe the HOME screen and then tapthe wrench and screwdriver icon on your MAXIFY MB2320.
2. Tap Maintenance.
3. Tap Deep cleaning.
4. Tap Yes to clean the printhead.
After the cleanings have been performed, please attempt to print again.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.