06-05-2018 03:18 PM
My mf5950 had a paper jam at the output area so I try to gently pull the paper out, but as I was pulling I heard paper ripping so I opened up the back cover and tried to remove the jam from there. I was able to pull out the jam but it took a piece of the paper with it and when I look into the opening from the back, I can see a piece of paper stuck on the roller that's on top of the red roller. Tried to get that piece of paper out with a paperclip but it seems like that piece of paper is stuck on the roller. I can still print but it leaves a blank streak on the right side (pictured). Please advise possible solution. Thanks in advance!!
06-06-2018 04:08 AM
Hi johnnylic
Click HERE for instructions to remove jams from your unit.
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.