02-20-2018 04:24 PM
Whenever we copy it goes to two-sided. We want it to only be one-sided. How do we change this? It did copy one-sided until a couple of days ago. Please advise...
Solved! Go to Solution.
02-23-2018 08:34 AM
Via the Conrtol Panel on your computer choose:
I have found that each PC in our office has required a slightly different approach when it comes to getting to the Layout section but hopefully this will help you get to where you need to be. You will still need to make sure 2 Sided is OFF on the physical printer itself. Good Luck
02-23-2018 08:34 AM
Via the Conrtol Panel on your computer choose:
I have found that each PC in our office has required a slightly different approach when it comes to getting to the Layout section but hopefully this will help you get to where you need to be. You will still need to make sure 2 Sided is OFF on the physical printer itself. Good Luck
05-24-2018 04:44 AM
Hi Lori4
You can specify the copy settings to turn off two sided copy. Click HERE for copying instructions.
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.