07-08-2016 06:42 AM
My printer is working fine when printing a small amount of documents but will randomly print pages and pages of code when asked to print a large amount. It's getting very frustrating as it only does this now and again so I don't always check it and it can have wasted large amounts of paper!
The code is only printed on one line across the top of the page. I'm using Windows 10 and only installed the drivers in February 2016, I've checked and there are no new ones since then. I'm using a Dell lap-top and am connected by USB cable. Any advice please?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.