01-06-2016 05:44 AM - edited 01-11-2016 12:25 PM
Hi I have a Canon IRC2380i. I am having a couple of print problems and would appreciate any advice.
1. The print copies have an intermittent error. There is a mark on the page that appears to be created by moisture? Several letters (or parts of an image) in a line will be printed again further along the page surrounded by a oily/transparent look. This does not appear on all copies and if you are doing a run of 100 or so it will come and go throughtout the run. This always occurs in a similar place on the pages where it happens.
2. The colours appear generally faded and grainy. I am using original Canon toner. And have carried out the basic clean programme on the machine, but it does not seem to have helped.
Any suggestions regarding these faults would be appreciated.
Thanks
Jan
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.