04-26-2019 09:52 PM
I have been using my D1320 for a couple of years and I love it. However, I did some maintenance (replaced rollers) because the paper was not feeding correctly and that works again but I also replaced the rollers and separation pad in the automatic document feeder and it no longer feeds. I was very careful and thought I put things back together properly but obviously I did something wrong. It makes the proper whirring sound but it won't pickup the paper. The rollers and separation pad look to be installed correctly so I'm at a loss.
Is there any documentation about how to disassemble and reassemble the document feeder? Any help would be greatly appreciated. I use(d) my ADF a lot and I'm about to replace this entire unit if I can't figure out what I did wrong.
Cheers!
04-27-2019 10:05 AM - last edited on 04-29-2019 12:31 PM by Tiffany
<removed per forum guidelines>
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
04-28-2019 03:26 AM
Thank you! I'll take a look and see if I can't figure out where I went wrong.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.