cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

P23-DH V calculator displaying an E (error?)

DA90108
Apprentice

An 'E' displays in the lower left-hand corner of the screen when I move the ON button to PRT and then none of the buttons work.  I have put in 4 new AA batteries as well as a new 2032 Lithium battery. The same problem occurs if I plug into AC power.  The calculator only works from the OFF to ON position but I need to be able to use the print capability. What does the 'E' mean and how can I get the print to work?

1 ACCEPTED SOLUTION

DA90108
Apprentice

SOLUTION (found on fixya.com): After removing the paper and paper cover, I removed the ink roller (it's marked 'PULL UP').  I gently nudged the numerical stamp to the left 2-3 times then it moved to the right. It was apparently stuck/jammed/off track causing the FEED to stop working.

 

 

View solution in original post

2 REPLIES 2

DA90108
Apprentice

SOLUTION (found on fixya.com): After removing the paper and paper cover, I removed the ink roller (it's marked 'PULL UP').  I gently nudged the numerical stamp to the left 2-3 times then it moved to the right. It was apparently stuck/jammed/off track causing the FEED to stop working.

 

 

Same exact problem, but unfortunately this solution does not work for me. I have checked the paper path for jam (nothing) and put in brand new AA alkaline batteries. No progress.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.