12-09-2013 02:52 AM
I got my canon pro-100 to be able to print on large inkjet photo negative transparencies for silk screen printing. But when I load the transparencies sometimes they will jam and if it dosnt jam it ends up chewing up the front or the back of the transparency and leaving streaks. I am using high qualty injet film.
01-09-2014 11:37 AM - edited 01-09-2014 11:38 AM
Hi jshor,
What tray are you feeding the paper from (rear or manual)? We recommend using manual feed for non-standard photo paper.
What is the weight of the paper you are using?
Do you have any paper feed issues with other paper?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.