07-26-2022 07:26 PM
hi canon community,
Im excited about my new r5, however when i use non canon lenses with manual aperture my shutter won’t take a picture. i’m in manual if that matters. please let me know if you have any suggestions thanks !
07-26-2022 07:31 PM
If the camera shows “F00” as the aperture value, then you may need to find the setting in the camera’s menu that allows it to fire the shutter without a lens attached.
07-26-2022 07:56 PM - edited 07-26-2022 07:58 PM
Waddizzle is right... Go to Orange menu item 4 "Release shutter w/o lens". "Enabled" should do it. Not much there, but it's page 818 in the R5 1.6.0 manual.
Newton
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.