cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Using T5i with studio flashes

TransTec
Contributor

I'm trying to set my T5i to work with studio flashes. I bought a Vello hotshoe adapter and set it up on the camera. The strobes work, but only if I turn Live View off. If the screen is on, the flashes won't fire.

Hopefully I'm missing something here, because it'd be nice to use the flashes with Live View on.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

It just may not be possible to use Live View with the studio flashes; turning the screen off isn't that big a deal. Thanks anyway.

View solution in original post

13 REPLIES 13

Waddizzle
Legend
Legend

The light meters differently when you are using LiveView. 

 

Why would you need LiveView to be active to take a picture?  Depending upon your settings, LiveView can alter your aspect ratio from 3:2, or some other setting/.

--------------------------------------------------------
"Enjoying photography since 1972."

ebiggs1
Legend
Legend

Turn off ETTL.  It should work in manual.  After the camera determines meter it should work anyway.  But it will work in manual.

EB
EOS 1D, EOS 1D MK IIn, EOS 1D MK III, EOS 1Ds MK III, EOS 1D MK IV and EOS 1DX and many lenses.

ebiggs1
Legend
Legend

BTW, you might try to reset the camera to default settings.  Whenever strange stuff happens, reset the camera.  Who knows what you may have set or accidentally set incorrectly?

EB
EOS 1D, EOS 1D MK IIn, EOS 1D MK III, EOS 1Ds MK III, EOS 1D MK IV and EOS 1DX and many lenses.

Not seeing how to do that. If I go into the camera menu and choose Flash Control, under ETTL Metering there are only two choices: Evaluative or Average. Neither seems to affect the operation of the flash.

Yeah, I ran into that after a couple hours of choosing about everything I could think of, without success. A good point, though, and one I'll remember.

Live View allows for very accurate focusing, using the magnification tool. That's helpful, because a lot of my photos end up being blown up for posters for a client, so accurate focus is helpful.

You need to reset your camera to default, first. It sounds like you may have something set wrong.

 

You don't know how to use manual mode?

EB
EOS 1D, EOS 1D MK IIn, EOS 1D MK III, EOS 1Ds MK III, EOS 1D MK IV and EOS 1DX and many lenses.

I have it set in manual mode, but that only gives me a basic flash setting. I'm using the camera in manual mode, with the shutter set for 1/30th of a second and an apperature of 8, ISO 200, manual focus.
But with those settings I don't see anything that lets me turn ETTL off. Could you walk me through it?
Thanks.


@TransTec wrote:
Live View allows for very accurate focusing, using the magnification tool. That's helpful, because a lot of my photos end up being blown up for posters for a client, so accurate focus is helpful.

I frequently use LiveView to manually set focus, too.  Then, I turn it off to set the exposure and take the shot. 

--------------------------------------------------------
"Enjoying photography since 1972."
Announcements