cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

T7 images black

Jlingo
Apprentice
I was shooting yesterday in manual mode and images were fine. Suddenly the images were all showing black. I have tried different modes, exposures, removing battery, resetting, on/off, changing lenses. The shutter doesn’t appear to be stuck. Any thoughts on fixes or possible issue?
1 ACCEPTED SOLUTION

jrhoffman75
Legend
Legend
Welcome to the forum.

Switch to Green Square A and confirm that the camera can take a photo.

If not try resetting all camera settings.

Once you have the camera functioning then go back to M and check all your settings b
John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

View solution in original post

2 REPLIES 2

jrhoffman75
Legend
Legend
Welcome to the forum.

Switch to Green Square A and confirm that the camera can take a photo.

If not try resetting all camera settings.

Once you have the camera functioning then go back to M and check all your settings b
John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I just tried that and the camera is working fine now. Could have sworn I tried this the other day and it didn't work. Thanks! Glad this apparently fixed the issue. Is there a known cause for this behavior?

 

 

Announcements