10-15-2017 10:35 PM
Is there anyway to disable the internal mic of the Rebel SL2 and just use an external source? I have the external source that sounds very good but all my files are getting bleed from the internal mics and it sounds not so great. I've tried looking through the manual but it says they both record at the same time. Any help would be appreciated.
Thanks
Paul
10-16-2017 09:25 AM
The manual is unclear, it says the external mic has "priority", which I take to mean that it urns off the internal mic and uses the external. You might have to call Canon to straighten it out.
10-16-2017 09:34 AM
01-22-2018 06:59 PM
Hello thediceyreview,
When you connect an external microphone to the EOS Rebel SL2, it cuts out the internal microphone. This is what is meant by given priority.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.