cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

R5 Intervalometer DOESN'T TRIGGER with back-button focus

jimre
Enthusiast

Serious BUG in my new R5. Unlike all my previous bodies (5DSR, 5D Mark IV, 7D Mark II) the built-in intervalometer DOES NOT TRIGGER the shutter, when the camera is set for Back-Button Focus. That is - Shutter Button Half-Press is set to "Metering Start". 

 

The back LED actually looks like it's taking pictures - but it's not. You see "TIMER" flashing every "N" seconds, but all it's really doing is metering once every N seconds. 

 

If I disable Back-Button Focus (set Shutter Button Half-Press to "Metering and AF Start") then the intervalometer works as expected. But like most serious photographers, I always have my Canon bodies configured for Back-Button Focus full time.  

 

I just wasted 2 hours thinking I was "shooting" a timelapse, but all it captured was the first image. Canon - PLEASE FIX THIS ASAP!

 

Thanks!

 

 

11 REPLIES 11

Waddizzle
Legend

No, this is NOT a bug.  The Interval Timer activates a virtual shutter button.  It has to work the same way in using the OVF or in LIve View mode.  It is only a problem if your lens is set to One Shot AF and the lens is set to AF.  I am not sure why you would want to the camera to refocus between shots, anyway.

 

4F689472-30D8-485A-B22D-14817931DAA1.jpeg

 

I suggest that you go into the menus see if you can set One Shot AF Release Priorityr.  This is from the 7D Mark II, and he default is Focus.  Problem solved.  If the R5 does not have this setting, then blame the Canon cripple hammer.  It's no bug.

--------------------------------------------------------
"The right mouse button is your friend."

"...this issue has *nothing* to do with putting your lens in MF. It fails exactly the same way, whether your lens is in AF or MF mode.

 

As I said, the workaround is to disable back-button focus. Otherwise the intervalometer just does "Metering" every N seconds, it never triggers the shutter. Whether you think it's a bug or not is irrelevant. The behavior is DIFFERENT from every other Canon body, and is simply broken on the R5."

 

No, it is not a bug.  This is simply how the camera work.  If you feel that you must disable BBF, then I suggest you do that.

--------------------------------------------------------
"The right mouse button is your friend."

No, just tested your suggestion. This fails exactly the same way regardless of whether One Shot AF Release Priority is set to Focus or Release. This is not the problem.

 

Further - I am NOT trying to re-focus between shots - as you're implying I'm trying to do. You seem to be missing the whole point of having BBF set in the first place. It's so you (or your intevalometer) can press the shutter button WITHOUT changing focus!

 

And per your comment on the other poster's thread - I also tested with the lens set to MF. Same exact failure as with the lens set to AF. 

 

This is a bug, whether you think so or not. This works on every other Canon body, and it's broken on the new R5. You seriously think it's intentional when using the built-in intervalomet that that camera only PRETENDS to take a picture every N seconds? 

 

 

And just for completeness, I also tested this with an EXTERNAL intervalometer. All same settings. External intervalometer works just fine with BBF enabled. 

 

It's only the BUILT-IN intervalometer that fails to trigger the shutter when BBF is enabled. If you dIsable BBF - then the built-in intervaolmeter works just fine.

 

I've shot hundreds of timelapses over the last 5 years on my previous Canon bodies (7D2, 5DSR, 5D4) using the built-in intervalometer with BBF enabled. No problems. So when I say my new R5 is broken in this regard, perhaps I have some credence.

 

Whoever at Canon wrote the intervalometer code on the new R5 - their code is simply pushing the wrong "virtual button".

 


@jimre wrote:

 

Whoever at Canon wrote the intervalometer code on the new R5 - their code is simply pushing the wrong "virtual button".

 


To expound on this - the intervalometer has ONE JOB:  trigger the camera shutter every N seconds. It's not doing it that ONE JOB. Therefore this is a bug.

 

On my R5, when the camera has BBF enabled (ie, you've removed AF from the shutter release button) - the built-in intervalometer switches to doing a SHUTTER HALF-PRESS every N seconds. It's not actually pushing the shutter release all the way.

 

As a workaround, you can disable BBF (by putting AF back on the shutter release button) - and it works as expected.

 

I can't think of any scenario where someone would intentionally want the intervalometer to HALF-PRESS the shutter button every N seconds, can you?

Update - submitted to Canon Support as a bug report, with detailed reproduction steps. Canon Support acknowledged receipt but no promise to fix.

UPDATE:  This issue is NOT fixed in R5 firmware ver 1.1.0. 

 

Just updated firmware & re-tested it. Still has the same problem - when using Back Button-only Focus (eg, AF Start is removed from shutter button) the built-in Intervalometer does NOT trigger the shutter. It merely does a SHUTTER BUTTON HALF-PRESS every N seconds.

Thanks for following up with them on this. I'm curious to see if you get anywhere with it as it effects me too.

Just updated R5 firmware to 1.1.1 and re-tested this bug. NO CHANGE - built-in intervalometer still fails to press the shutter button when camera is set to Back-Button-Only Focus.

 

Workarounds remain the same:

 

1) Put "AF Start" function back onto the Shutter-Half-Press button (eg, disable BBF)

 

2) Use an external intervalometer

 

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.