09-11-2023 09:04 PM - last edited on 09-12-2023 08:52 AM by Danny
The Register/recall shooting func* graphic is not available in the custom button selections. Was not there with original firmware 1.0.1 upgraded to firmware 1.4.1 still not available to select?
How do I get access to this function?
09-11-2023 09:10 PM
Are you in an auto shooting mode? It might only be available in P M Av Tv shooting modes.
09-11-2023 09:18 PM
See this from the manual:
09-12-2023 11:01 AM
Bob, I have tried all modes except Auto. This graphic in not in the button menus.
09-12-2023 11:23 AM - edited 09-12-2023 11:47 AM
You may have to select another button to assign Register/Recall shooting function to. Not all buttons can be assigned to just any function. See this chart from the manual. It tells you which buttons you can use:
09-12-2023 06:55 PM
Bob, thanks problem solved.
09-12-2023 07:33 PM
Good to hear.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.