11-27-2017 04:38 PM
I purchased a used a EOS rebel TI 400 D camera
I did not know that the LCD screen did not display live view
I am disabled and use a tongue switch, which is only accessible for certain models
I did not know that the model I purchased was not accessible because of the live view
I can do a download for the camera to change this feature?
I do not want to have to purchase the new camera.
Can you help?
11-27-2017 04:43 PM
11-27-2017 07:07 PM
Your only hope is to get a windows touch computer like the Microsoft surface and see if you can get EOS Utility 2.4 running on it, possibly in a windows 7 virtual box. This will connect to the camera and allow you to shoot remotely:
Note: This will NOT allow you to preview the image - the 400D cannot take images in anything approaching live view - but it will allow you to shoot remotely, make adjustments, and shoot again.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.