01-23-2024
11:01 AM
- last edited on
01-23-2024
11:19 AM
by
Ron
When I use the flash on the camera, the hot shoe works very well. However, when I use a trigger to take the camera off the flash, it does not work. I tested it with the same model of camera, and it works fine, but not with this camera.
01-23-2024 11:02 AM
Much more information is needed:
01-23-2024 11:06 AM
Thank you for responding,
It's Canon EOS R With three deferent flashes Such Canon flash with Canon Trigger. Also with third Party FlashPoint with Godox Trigger.
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.