01-04-2014 09:48 PM
Not sure if someone can spread any light on this issue.....Trying to follow the video shown http://www.dylandsara.com/canon-5d-mark-iii-double-exposure-tutorial/
And when i switch to the Live View mode to see the overlay there is nothing there.....like shown in the video....and switching back out of live view i find the function disabled....
Maybe this is a firmware update issue, in that I have updated the camera to the latest release from Canon version 1.2.3
01-04-2014 10:37 PM
Okay...found out how this is done after further reading and playing about with the camera
You don't actually switch the button from picture mode to Live View Mode.......
what you have to do is press the Start/Stop button in the middle of the switch that you would normally use if you were to switch to Live View Mode and Record a video...
09-02-2015 04:27 PM
Wow! Thank you so much!! I was just trying to follow the same instructions and ran into the same snag. You don't switch to live view... THANK YOU
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.