02-27-2013 12:59 AM
I received the Rebel t4i for Christmas. It's been working great until today. The lcd screen no longer shows any information. If I press any of the setting buttons (ISO, etc), nothing shows up. It worked fine this past weekend.
01-28-2017 07:43 PM
Thanks for your post. For me the rubber eye piece was bumped up a bit doing just what you said. I never whould have figured this one out.
Thanks Bill
04-07-2017 07:37 AM
I have a EOS 1200D, the camera is still taking photos, but the LCD screen is blank? Can anyone help.
04-07-2017 10:33 AM
Did you press the info button?
04-07-2017 05:05 PM
The tip that helped me: check to make sure the black 'cup' around the eyepiece is pushed all the way down in place. If it's pushed up even just a little, the sensor in it causes the LCD to go blank.
04-23-2017 05:15 AM - edited 04-23-2017 05:15 AM
Hello,
I tried the recommendation. But The LCD monitor just doesn't switch on. It was working fine till last evening.
Sorry I am just unable to find display off sensor near viewfinder?
Can someone please help?
Regards
Hema
05-19-2017 05:02 PM
What if you are missing the piece of rubber that goes around the eye piece? Would that cause my screen to go blank? If so, do you know where I can get a replacement for my camera?
06-06-2017 10:56 PM - edited 06-06-2017 11:01 PM
Thank you! My eye cup was indeed covering the sensor. This was driving me crazy! Appreciate your post.
08-19-2017 04:18 PM
My eye cup had simply slid up! Thanks for the advice.
09-26-2018 01:31 PM
ScottyP you are more than fantastic...I have searched and read manuals and online posts so much, and gotten nowhere and still had the same problem.
I have and love my Canon T5i, and then one day it just quit showing the settings and picture in the monitor after just taking the picture...EVERYTHING else worked fine, i verified the LCD screen was working everywhich way 'except'..!!..
I had no idea that a little bit of dust could/would cause the screen NOT to show the picture that was just taken...HOWEVER, after reading your post took my dust free rag and cleaned/wiped the entire camera body/lens with TLC..!!..and dang if it didn't start working again...thank you so very much.
I know your original post was quite old, but believe me, it is still relevant..!!..one lesson i won't forget for a long time..
v/r,
JohnP
01-20-2019 08:49 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.