cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

I can't get the memory cards into my XTi. Help.

jcjordan11
Apprentice
 
7 REPLIES 7

Scatterbrained
Enthusiast

check to see if you have any bent pins in the card dock.

A little more information on exactly what is happening would help but if it's going in most of the way but not the last 1/4 inch or so a bent pin would sound like a correct diagnosis. A good light & a little patience with a jewelers screwdriver might set it back to it's normal position.

"A skill is developed through constant practice with a passion to improve, not bought."


@Scatterbrained wrote:

check to see if you have any bent pins in the card dock.


First, the XTi uses SD cards. No "bent pins" there.

 

Second, I wish people would realize that these subject only, no text in the body, posts are spam and not serious.

 

Probably Nikon fanboys having fun.

-------------------------------------
http://trulandphoto.zenfolio.com/
http://trulandphoto.blogspot.com/

You may be correct about the SPAM, and because I didn't know what type of card the XTi uses I looked it up before posting a reply. You should have too.

 

http://www.canon.ca/inetCA/arcproducts?m=gp&pid=2987#_030

"A skill is developed through constant practice with a passion to improve, not bought."


@cicopo wrote:

You may be correct about the SPAM, and because I didn't know what type of card the XTi uses I looked it up before posting a reply. You should have too.

 

http://www.canon.ca/inetCA/arcproducts?m=gp&pid=2987#_030


Whatever. I'm actually sick of wasting my time on these forums. Was decent before they opened it up to the masses

Toodles.

-------------------------------------
http://trulandphoto.zenfolio.com/
http://trulandphoto.blogspot.com/

We'll miss you Smiley Very Happy

 

xTi uses CF cards.

 

Maybe the OP is putting them in facing the wrong way.

 

 

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.