01-19-2017 02:51 AM
Hello,couple of days ago i dropped my camera and untill that point my camera worked fine.so only part removed from the camera was the battery door,other than that just a scratch on the body,and then i put back the camera door and also the battery firmly placed,but still it won't turn on,i would greatly appreciate your ideas that might get it to work,thank you in advance
02-07-2020 02:28 PM
I have a Canon EOS Digital Rebel XTi camera which just stopped working.....dead as a door nail! I had gone outside; took some pictures; came back into the house and tried to turn it on to view some of them and it was dead! Just like that. I looked for micro switches; changed batteries; removed the card and replaced it; removed the card and the battery and held down the shutter release button for 15 seconds; and all to no avail. Any other suggestions? Sure would be appreciated. The camera takes very nice pictures and works like a dream when working of course!
02-07-2020 04:03 PM
It has been a good run, but:
02-07-2020 09:24 PM
Thanks KVBarkley but I think I will try mouth to mouth resusitation first. Really, I will disassemble it starting at the power and move through the camera checking to see where the power stops. Then if that doesn't work I will take your advice. Sigh!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.