07-31-2020 02:15 PM - edited 07-31-2020 03:48 PM
I received my EOS R5 today along with my GP-E2 GPS Receiver. I connected the two and the R5 is receiveing GPS data. However, when i try and set the clock using GPS it tells me it cant because it is not receiveing any GPS signal. Any one else have this issue?
07-31-2020 02:39 PM
Have you tried it outside? The geolocation might use the last position if it loses signal, but the clock requires an active lock.
07-31-2020 02:40 PM
After several tries and letting it site a while it started working
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.