09-01-2020 12:53 PM - last edited on 12-01-2022 03:28 PM by Danny
I haven't used my rebel in a couple of years and decided to break it out again. I charged the battery but a red light comes on and it won't let me press the button to snap the picture. Will I need to take it to a repair shop? Anyone else had this issue?
09-01-2020 01:05 PM
Which red light? If it is the card access light, you might need a new card, or make sure you have one in the camera.
09-02-2020 04:02 PM
You have several issues to think about here. One the battery may be bad. Two the charger may be bad. Those have to be eliminated from the issue first. You should buy a new SD card exactly like the manual recommends, Do not buy something other than it.
If this fixes it, great. You then need to do a full reset of the T5. If the proven good battery/charger and new SD card do not fix it, you need to know the camera is only worth $150 ro $200 if it is in very good working condition. That does not leave a lot of room for a repair shop. You need to call Canon to make sure they still even service the T5.
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.