04-02-2024 04:19 PM - last edited on 04-02-2024 04:22 PM by Danny
I am using an external monitor with the R6 Mark ll and I can't get any audio during the playback.
I have used an external monitor using the HDMI port and get audio during recording, through the headphone jack in the monitor. However, when I play back any clips I don't get any audio, either through the monitor or camera headphones ports.
I have also used my iPhone as an external monitor, using the DJI RavenEye and don't get any audio on playback there either.
Is there any way to get audio during playback?
The only way I managed it was to unplug the monitor and playback through the screen on the back of the camera and plug headphones into the camera port. There has to be a better way other than unplugging all the cbales each time to play clips for audio.
#r6 #r5
04-03-2024 07:59 AM
dbcanon,
I have a T8i.
At one point in my manual, it says that when an HDMI cable is plugged in, no sound will be output. At another point in the manual, it says that when plugged into a television, you can only adjust the sound using the volume control on the TV set, you can't adjust the sound on the camera.
Steve Thomas
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.