03-20-2024 12:45 PM - last edited on 03-26-2024 12:45 PM by Danny
I have an Canon R6 mark ii and recently when setting the white balance, it won’t translate through the viewfinder. It will either be way too warm or way too cold when looking through the viewfinder. If I take the picture and then look at it on the LCD the white balance is normal. Has anyone with this camera had the same issue?
I’ve had it since September with no issues until now. I also had it go completely black tonight and wouldn’t resolve with just a quick on and off. I had to remove the battery and wait a bit, then put it back in and it was fine. But I haven’t had this camera for long and that is worrying me…
I shoot in manual/raw with either kelvin or a custom white balance with a gray card. No off brand batteries or anything either. The white balance issue is random too, one minute it will be too warm and the next it’s totally fine again.
Any ideas?
03-20-2024 05:33 PM
Try contacting Canon Support.
https://www.usa.canon.com/support/service-and-repair
03-20-2024 06:20 PM
I did I just haven’t heard back yet. Thanks for your reply!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.