12-04-2012 05:16 PM
How can I fix a " Err 30 " After a few shots with flash I get this err 30 and I have to shut OFF and ON again to work. I appreciate any help. Thanks
12-09-2012 04:16 PM - edited 12-09-2012 04:17 PM
"Err 30" indicates that malfunctions related to the power source have been detected. Remove the battery from the camera and use a soft microfiber cleaning cloth to clean the contacts on the battery and inside the battery compartment. If this does not work, try a different battery. If the alternate battery produces the same results, your camera will require service to correct the issue.
To start your repair process, you'll need to complete a Repair Request on our website.
If this is a time sensitive-matter, additional support options are available at Contact Us.
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.