02-17-2023
04:05 AM
- last edited on
02-21-2023
10:52 AM
by
Danny
Hi i have noticed that my laptop doesent detect my camera with the external Power supply (bought on Amazon), but only if i plug in the battery.
I really Need to use external Power because the camera Is attached into the telescope for 3-4 h.
Whats could be the problema?
02-17-2023 09:39 AM
Are you also connected to the USB port on the camera?
Sounds like there is an issue with your power adapter. If communication has stopped, then that is usually a red flag for ground loop associated with the power adapter not being properly grounded internally.
I recommend that you use the Canon power adapter, which is known to work properly.
02-17-2023 10:52 AM
Yes i am also plugged via USB cable.
When i use my adapter laptop detect a "unrecognize device" error.
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.