09-08-2013 09:59 PM
i need to connect the Canon Rebel Ti 2 to the HP laptop - to stream the video BUT there's only the HDMI and USB.
Will I be able to use the HDMI or do I have to use the USB and will I need special software or ADAPTOR cables?
Can I use just any adaptor cable or do I need a special cable from Canon?
We start streaming next Friday - so Any Help Would Be Appreciated.
09-13-2013 07:01 AM
Hi dance55!
Thanks for posting!
The EOS Rebel T2i was only designed to be directly connected to a laptop via USB. The connector on the side of the camera is common, so no specific special cable is needed. USB cables that will work can be found almost everywhere.
It sounds to me like what you are trying to do is capture a live signal from the camera, not transfer existing video from the camera.
If this is a time sensitive-matter, additional support options are available at Contact Us.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.