03-04-2019 01:28 PM
Hello, hoping someone can help? I cannot get AEB to work on my T7i. It will let me select the exposure values above and below zero , but that is it. camera will not take 3 exposures.... only takes one exposure. and yes i have the drive mode set to low speed continuos. Ive tried everything PLEASE HELP
Solved! Go to Solution.
03-04-2019 04:21 PM
03-04-2019 01:43 PM
Have you tried the single drive mode?
03-04-2019 01:50 PM
03-04-2019 04:15 PM
On my t6S, when I use one iof the "combine multiple shot modes" I just use single shot and it automagically takes all 3.
03-04-2019 04:21 PM
Are you holding the button down?
03-04-2019 05:52 PM
Hey Thanks for the help, i feel really stupid, either my remote shutter cable is bad or something, AEB works holding the camera button down, apparently i wasnt holding it long enough....works now , thanks alot
03-04-2019 04:26 PM
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.